MANSI CDS Series advanced dual fuel changeover switches boast a combination of compactness and state of the art technology and intelligent functionality eliminating redundant changeover operations and enabling efficient changeover. A progressive five staged fuel level display is provided using four indicator LEDs, reserve level being indicated by the first LED blinking.  An internal output overload protection protects the electronics from valve coil failures and accidental shorting of outputs to ground. Design provides for the vehicle RPM signal to be conveniently sensed in three ways: using a capacitive pickup clamp on one of the spark plug cable, or tying IMPULSE cable to ignition coil negative terminal or tying IMPULSE cable to ECU’s RPM output terminal. These switches are conveniently configurable for use with MPFI or Carburetor vehicles by simply cutting a single harness cable at the time of fitment. During fitment these switches could be mounted underneath the dashboard or in a dashboard side slot. An adjustment preset enables setting of changeover RPM for MPFI vehicles and the fuel cutoff time delay for Carburetor vehicles.

• Compact Size: 82.0 x 33.6 x 21.1 mm (LxWxH).
• Functionality selection as per MPFI or Carburetor vehicle at the time of fitment.
• Intelligent Operation.
• Models available for use with various resistive or voltage level sensors.
• RPM sensing via capacitive pickup, ignition coil or ECU output.
• Output overload protection (CDS-xxS models only).
• Available with Relay or Solid State Switching
• Available with Rocker or Dome type switch.
• Mounting under dashboard or in side slot.
• ESD Safe, Microprocessor based design.
• RoHS compliant.

• MPFI based LPG/CNG Vehicles
• Carburetor based LPG/CNG Vehicles
• OEM fitment and after market conversion kits
  

• Operating Voltage Range: 8V to 18V DC (Note: Customized design available for vehicles with 24V    battery)
  
  
• Operating Temperature Range: -20 °C to +85 °C
  
  
• Maximum Operating Humidity: 95 %RH
  
  
• Vehicle Suitability: 3, 4, 5, 6, 7 and 8 Cylinders, 4 Stroke, MPFI and Carburetor based Vehicles
  
  
• Harness cable length: 1.85m
  
  
• Standards: Follows UNECE Regulations 67, 110 and 114
  
  
• ESD Protection in CDS-xS models: All terminals
  
  
• ESD Protection in CDS-xxM models: All terminals except Petrol and Gas. Petrol and Gas
  
  
• terminals are protected with negative surge protection snubber diode that can sustain 1kV peak reverse voltage.
  
  
• ESD Protection class: IEC 61000-4-2 level 4: 15 kV (air discharge) / 8 kV (contact discharge)
  
  
• Note: ESD Protection not available in Economy Grade models.